Connect your rover

An off-the-shelf rover (any brand)

1. Create an account — Get Started on the home page.
2. Add a rover user — Setup → Rover Users → + Add Rover User: a username and password for this device (one per rover).
3. Set up its NTRIP client:

   Host	ntrip.rtkonline.net
   Port	2101
   Mountpoint	NEAR — the nearest base, picked for you (or a base's own name from Mountpoints)
   Username / password	the rover user from step 2

4. Send your position — turn on “send position (GGA) to the caster”, so NEAR knows where you are. No GGA? The mobile app can send it instead.
5. Coins — other people's bases cost 1 coin an hour: request coins in your Wallet. Your own shared bases are free with the tokens they earn.
6. Work — connect, and the rover reaches RTK Fixed within seconds to a minute.

Our rover software (do it yourself)

The same software as the base, in rover mode, set up from its own web page.

1. Hardware — a Linux board (amd64, arm64 or armhf) or an ESP32, with a UM980 / UM982, LC29H (DA, BA, CA or EA), UM626N or ZED-F9P (experimental).
2. Install — sign in and open Device firmware for the package and the instructions.
3. Set up the module — on the device's web page: Auto-detect, then Initial Setup in rover mode.
4. Corrections — choose rtkonline.net, mountpoint NEAR, and your rover username and password (step 2 above). Needs a Limited or Full license.
5. Work — the fix, satellites and your position in local grid coordinates show live; save points when you need them.